Advising Indemnification Agreements with Charles Stec, J.D.

In the second episode of a special two-part series, Executive Vice President Daniel Frazee interviews Charles Stec, J.D., accomplished attorney at Lanak & Hanna, to advise construction companies on what to include in indemnification agreements.

Daniel Frazee: Welcome back to StudioOne™ everybody. We're happy to be joined again by Charles Stec from Lanak and Hanna. We're going to change the conversation a little bit. Charles was nice enough to talk with Drew Garcia, our landscape leader about sub-contract agreements. We're going to shift into indemnification So, welcome back to the studio, Charles, and thanks again for joining us.

Charles Stec: Thanks for having me back. It's my pleasure.

DF: Okay, well, let's talk about indemnification agreements. More specifically, tell our listeners what should go through their minds when they hear that word indemnification and how it may impact them in construction?

CS: So indemnification is a big legal word that simply means a promise to pay for damages or defects that arise from your work.  The bigger concern lately because of the cost of litigation is that there is a duty to defend also included with a duty to indemnify. What that really means is that if there's a claim, you end up being responsible to pay for the legal fees and costs of the person that's making that claim against you. And those costs, especially in smaller claims, can sometimes exceed the value of the actual damages at issue.

So an indemnification provision in a contract can be used to really define who is going to be responsible and to tell a subcontractor that they're responsible for damages that arise from their work. But how we write that provision can very much impact how it will be interpreted and what your actual allocation of responsibility will be.

DF: Okay. So, furthering that part of what you're talking about, can you provide us with an example how indemnification, when worded a specific way, can negatively impact, let's say, a lower tier trade that we might represent?

CS: Sure Daniel. Let’s take a drywall subcontractor as our example. If our drywall subcontractor has an indemnification provision as contract, that ultimately says that he is responsible to defend and indemnify for claims arising from or any way related to his work, then if we had a scenario where there was a water leak from the roof, from plumbing, whatever it is, and it ultimately results in the wall that's dry walled having buckling or mold, then in the event of a claim, that drywall subcontractor could arguably be responsible to indemnify and defend because our provision says in any way relating to his work.

But if we rewrite that position to just say he's only responsible for claims that arise from the negligent performance of his work. Now, in our scenario of the water leak, his duty to indemnify and to defend won't be triggered because the claim ultimately comes from a water leak, not from something wrong with how the drywall work was installed

DF: Okay, that makes sense. And I'm going to go a little off cuff with you, but I want to better understand because I think we have a lot of clients that have concern with redlining contracts, right? They're working with a preferred contractor, a really solid relationship. They don't want to disrupt that. So in your experience, when there is pushback, when there is redlining of contracts, how do most general contractors respond to that when you insert that type of wording. Does it depend on the general or is there some reasonable compromise that you've seen?

CS: So I've actually seen mostly reasonable compromise. I think everybody knows that a contract is ultimately supposed to be negotiated at arm's length. It's supposed to be the two parties are negotiating their position. What people are afraid of as a subcontractor is, "Oh, I'm not going to get the work because I'm not just accepting the contract as it is." But in that scenario, that contractor is running the risk that you're going to argue later that this was a contract of adhesion. Take it or leave it and therefore it's not enforceable. So they're typically open-minded and I have many, many a times in my recent past found myself on the phone with the general contractor's lawyer and we negotiate the few positions that are disputed in a contract. They expect it and for the most part if your requests for revisions are reasonable, they're going to get accepted.

DF: Very helpful. That's very helpful. So let's continue looking at indemnification clauses from a subcontractor's perspective. Walk us through what they may see in a typical contract and some specific examples, again, back to redlining or changing language that can minimize their exposure.

CS: So all contracts are a little different, and every one of these indemnity provisions has been written by different lawyers, so they're all a little different, but I'll give you kind of a general idea of what one normally sounds like. So my example is, “subcontractor agrees to indemnify and hold harmless the owner, contractor, and their agents, and any entity or person for which the contractor is responsible per the contract documents, from and against any claims, damages, or losses, including attorney's fees and costs arising from or in any way related to the subcontractor's work.”

So using my example, there's a few things that you would want to consider redlining with that provision. The first is the vague description of who you're promising to either defend or to indemnify. So in our example it said any entity or person for which the contractor is responsible. Well that's not defined and that creates a very real possibility that you could find yourself either having to provide defense fees for--or indemnity--to parties you've never even met and having to pay potentially multiple defenses. So in that case, I would strike that language in its entirety and instead make sure that each of the people that you were agreeing to identify are clearly defined. Normally that's going to be the prime contractor and the owner only. There may be some scenarios on certain jobs where you would agree to someone else, but it should be defined so you know who and what responsibility you're taking on.

DF: Okay.

CS: In our same example, another consideration is you could add language excluding liability for the owner or the general contractor's negligence. So let's talk about what that would be. For example, if the owner knows there's an unsafe condition there, there's a hole in the ground, a bad step, whatever the case may be, he doesn't tell anybody about it and leaves it there and one of your employees gets injured. Excluding that liability would make sure that the owner becomes responsible and you're not indemnifying the owner for your employee or some other person's injury that's actually coming from a condition the owner knew about and left there and didn't tell anybody.

Similarly, if another contractor on the job has done something that is so poor that it is potentially a danger either to other work or to cause injury. Let's say framing was done with a too small of a header and nobody knows that one day comes crashing down. That would be an example that if the contractor knew that their other sub had put in that bad header and didn't tell anybody that you would want to exclude that damage. So I definitely recommend adding language, excluding the gross negligence of either the owner or the contractor.

DF: Okay, all right.

CS: And a final example, it goes back to the defense costs. So in every contract for indemnity, the law implies this duty to defend. And the duty to defend arises at the time that they tender it to you, they say we've got a claim against us. And so you're now paying the legal fees of somebody else before the claims ever resolved and it's determined whether or not you did anything wrong.

Now, in our example, it said attorney’s fees and costs and you could imply that that is that duty to defend, but simply striking that wouldn't be enough, because the law actually implies the duty in to any contract of indemnity. So you have to specifically excluded it. So what you could say is I have no duty to defend a lot of times though Your contractors and owners might reject that. So what we could also consider is limiting what that duty to defend to be.

Two possibilities you could talk about is; saying that you will only agree to pay your proportionate share of the potential defense costs based on your proportionate share of the potential damages so that it's now shared amongst other subcontractors or of the contractor whoever else might be involved in the particular accident or event. The other would be to put a limitation of liability provision in where you could say our liability is either limited to what insurance proceeds pay or even to a specific dollar amounts. I've seen people say let's put it to the total amount that I was paid on the project or a set number like $100,000. Those types of provisions can help limit that defense cost that you ultimately could see picking up from an alleged accident.

DF: Okay, all right. Thanks for kind of going into that detail. Very helpful for our subs to understand some areas to be focusing on. So, if you look at indemnification clauses from a direct contractor's perspective on commercial and service contracts, what should they be watching out for and how can they redline or a change language that can minimize their exposure?

CS: Sure. So, obviously, when you're talking about these direct contractors, those on a commercial or a service agreement, their relationship is a little bit different. So they're now no longer a subcontractor lower down in the chain, but they're in a direct contract, probably with the project owner. So a lot of our discussion before on subcontractors would still apply, but there's a few other things that you might want to look at as well.

First, I've seen in a lot of direct contracts lately that in the indemnification provision, one of the parties to indemnify that owners have been adding is the design team, either the architect or the engineer. Those should be excluded because as the contractor--unless we're talking about a wholly different subject, which is design build agreements--the contractor has no control over the design. They're not able to influence how it's done, how it's built, or most of the times the design's done long before they ever get there. So to indemnify the design team doesn't make sense because it's not someone that you ever had any ability to control the quality of that work. So I think that those should be excluded, be redlined out, and also you would consider adding a phrase that says something to the effect of the contractor is not responsible for claims that arise from design defects or design errors or emissions. You don't really want to be taking on liability for a designer that you didn't have any business with and you're not in contract with.

DF: That makes sense.

CS: Another example that I've seen is that a lot of these indemnification agreements with owners are very broad. They say all claims, damages, liabilities, or losses and the problem is it doesn't clarify for what claims. Are we talking about claims from the owner or claims made to the owner? So what I've been recommending lately is that in those broad indemnity provisions, that it be revised to say for third party claims. That way the owner can't sort of hodgepodge the indemnity provision into a requirement to you to pay their defense fees to sue you. So that's a revision that we've seen come up more often than not lately.

Another that really is beneficial and it sort of goes back into the design question from a minute ago is putting in a reverse indemnity provision. So in a lot of projects, the owner provides to the contractor a set of plans, maybe some reports, some geotechnical reports, whatever the case may be, and the contractor does their work based on those reports. In a reverse indemnity provision, the owner agrees to indemnify the contractor for errors and emissions in those reports. So let's take for example, you are doing, you know, subterranean grading and there is a retaining wall to hold in that subterranean dig if the design plans didn't build a big enough set of supports and you build what's in the design plans and it fails, you shouldn't be the one responsible for that failure because it's the design, not the construction. So the reverse indemnity provision would then make the owner responsible to go to that designer for that claim rather than come to you as the contractor.

DF: Okay, all right.

CS: Finally, there are a lot of other ancillary provisions in a contract that read together with the indemnity provision can help minimize your liability. We talked about two of them with the subcontractors. That's a consequential damages waiver, those indirect costs that may come up. And the other being excluding damages for latent defects. We talked about it in the underground, an unknown type, things you wouldn't know there, like utility or box. Those types of provisions you could consider having in there and they would define when your indemnity would kick in.

Others that you could talk about adding would be a clearly defined delay provision. If your project is running late, who's responsible for that or defining what the damages would be and maybe setting a liquidated damages amount on a daily rate or a monthly rate. So at least you could control your risk because you know what that potential damage would be if it runs late.

And finally, it would be a provision limiting what recoverable damages could be, either to insurance proceeds or the maximum amount of liability, like we discussed earlier.

So the main point is that every construction business is a little different. And it makes sense to tailor your contracts to the type of trade that you're in, the type of jobs that you're doing, they could be public, they could be private, and there's different risks and allocations that come with those different types of projects. So in my belief, a little bit of foresight in working with your contracts in advance can really help control your risks in the event that something does go wrong in the future.

DF: Well, and I think Drew alluded to it too, that your process of being out in front of this and proactive really aligns with how we interact with our clients trying to mitigate risk on the front end. But so often we get feedback that sometimes crosses that line of insurance to legal, where we can comment and provide some feedback, but we don't have the expertise that you do in the background that can really help them truly negotiate these contracts or just tighten up everything that they have with respects to sub-agreements and/or indemnification.

So these bullet points are so helpful for us and our team, and I can't thank you enough for sharing this. I know this is just the tip of the iceberg too. I know what you do for many of our clients is so effective. Tell us again, if people need to connect with you, what's a good way to start the dialogue?

CS: Well, again, thank you for having me here today. It's been a pleasure. You're absolutely right. It is the tip of the iceberg. There are so many different things we could talk about. We could have gone on for hours. I really do like to tailor to a specific contractor's needs. So the best thing to do is literally to reach out. We're available by phone, consultation is free, I can be reached at my office, it's 714-451-7919, send me an email, that's ckstec@lanak-hanna.com or you can go to our website, which is Lanak-Hanna.com.

I say it all the time and I'll say it again here, I think that a little bit of upfront attention, a small amount of money you spend consulting with a lawyer. If it saves you from one lawsuit, it's worth every penny.

DF: Agreed and I think that's been consistent with the clients that have partnered with you and I think they would say the same thing. So thank you again and thanks to our listeners for joining us again in this series and we'll see you next time.

Catch Up on Part 1

Market Update: Sexual Misconduct Liability in Healthcare Organizations

Author, Sam Brown, Vice President, Human Services Group, Rancho Mesa Insurance Services, Inc.

Rancho Mesa’s insurance brokers specializing in healthcare, education and non-profit organizations continue to navigate the hardening insurance marketplace, characterized by tighter underwriting guidelines, reduced limits of liability, increased deductibles, and higher policy premiums.

One of the sectors most impacted by the hardening market is healthcare and its ability to attain adequate insurance protection, specifically sexual misconduct liability insurance. Continued claim activity, social inflation, third-party litigation financing, and the increased cost of litigation all contribute to the hardening market conditions.

Consider the following data points in order to understand why the market is hardening. Several states have recently removed barriers to reporting abuse. Only five states maintain a criminal statute of limitations on claims of abuse. Nineteen states have eliminated statutes of limitations on civil claims. And, 30 states have enacted laws allowing victims more flexibility to revive claims of sexual abuse.

Additionally, according to the Institute for Legal Reform, from 2016 to 2020 the tort system’s direct economic costs grew 6% every year, exceeding both the inflation rate and GDP. That means more and more cases are litigated each year.

Not only are the number of cases increasing, but a 2023 report titled “Medical Malpractice Claims-Made Social Inflation and Loss Development Report” indicates that claims exceeding $1,000,000 continue to grow in frequency. So, the number of claims are increasing as the cost of claims are increasing.

An increase in third-party litigation financing, the practice of investors funding lawsuits in exchange for a portion of the settlement and return on the investment, can discourage prompt and reasonable settlements. This practice also reduces an attorney’s accountability to good faith standards and produces more lawsuits.

Impact to Sexual Misconduct Coverage and Healthcare Providers

Insurance companies are now reducing their financial risk for abuse exposures. This means medical professional liability underwriters may need additional underwriting information to quote limits in excess of $100,000. Additional underwriting measures may include issuing non-renewals, considering jurisdictional challenges, careful consideration of policies covering young patients, excluding all trafficking allegations, and adding a per victim or perpetrator deductible.

Risk Management Strategies for Healthcare Providers

Healthcare organizations can help mitigate some of the risk by:

• Using chaperones to reassure patients of a procedure’s professional nature. The chaperone provides a witness to support the practitioner’s actions.

• Performing examinations for a minor in the presence of a parent, guardian, or chaperone.

• Educating the patient about the exam and its necessity prior to the patient’s appointment.

• Documenting the exam’s medical necessity, the education provided to the patient, and the chaperone’s identity.

• Maintaining boundaries by establishing proper practitioner-patient relationships.

• Educating staff on proper patient interactions, professional boundaries and reporting of misconduct.

• Ensuring familiarity with your state’s reporting obligations related to sexual misconduct and include the requirements in your policies and procedures.

The legal environment and claim trends add financial exposure for both healthcare providers and insurance companies. Rancho Mesa will continue to monitor these trends to better educate and advocate for clients. Please contact me at (619) 937-0175 or sbrown@ranchomesa.com to discuss possible insurance solutions.

Navigating Subcontract Agreements with Charles Stec, J.D.

In the first of a special two-part series, Executive Vice President Daniel Frazee and Landscape Group Vice President Drew Garcia, interview Charles Stec, J.D., accomplished attorney at Lanak & Hanna, to discuss how construction companies can best navigate subcontract agreements. 

Daniel Frazee: Welcome everyone and thanks for joining us. I am Daniel Frazee, the construction group leader and we're back in StudioOne™ with Drew Garcia, our landscape group leader. Welcome Drew.

Drew Garcia: Dan, good morning. How you doing?

DF: Doing fantastic. We're really excited to be joined by Charles Stec, an accomplished attorney supporting the construction industry with Lanak and Hanna. Charles is here to share his experience in representing California trade and general contractors, which includes several of our clients. And more specifically, I think we're going to get inside two important but very distinct topics, subcontract agreements and indemnification. Welcome, Charles, to StudioOne™.

Charles Stec: Thanks for having me, it's my pleasure.

DF: So before we get started, Charles, tell us more about yourself and how you became so focused in the construction industry?

CS: Well, I actually got my start in the trades. I worked as a roofer back in the 90s and 2000s and worked on a lot of different projects: residential, commercial, public projects. Ultimately I still have and maintain a general contractor's license and when I got into the law I ended up gravitating back to construction both because of my experience but also because I believed as a lawyer that I could help contractor clients navigate the pitfalls of the construction industry by getting involved earlier.

What I've noticed in my practice is that many contractors don't consult with an attorney until something goes wrong and they get sued. And at that point, they've already got the contract, says what it says, the facts are the facts. What I like to do is get involved earlier. And at that point, we can look at contracts, we can look at what's going on in a project, and try to assess risks and minimize risks. So the firm I work for, Lanak and Hanna, were really a one-stop construction shop. We handle everything that's related to a construction business. So from the outset, we handle, for example, the contracts, but also bids during the project, labor issues that might come up. And at the end, collections such as stop notices and mechanics liens, or in the event something goes wrong, defending against a defect or a damages claim.

DG: Very good. Yeah, I think we can relate with your guys’ proactive approach to business and how you're trying to kind of consult with your customers in advance of an issue and obviously when there is an issue reacting to it and making sure that you're there for them. We take a similar approach to the way that we do our business. And when we jump into subcontract agreements you know Rancho Mesa we've got a number of different businesses that we help support. We could have general contractors; we could have trade contractors that are a part of a project. We've also got service contractors that might be subbing out small portions of their work where it might not be as glaring or they might think there's not a need to have a subcontract agreement.

Obviously, it's important. Can you talk to us about why the sub contract agreement is an important step in the relationship between two service partners and how it provides clarity?

CS: Sure, Drew. Let's start with the basic, what is the purpose of a contract? Really the purpose of a contract is to allocate risk by defining the rights and responsibilities between your two service providers to avoid disputes that are caused by misunderstandings or to set forth what's going to happen if something actually does go wrong. So generally what we see a lot of in the most common disputes between contractors and subs or a service provider and their subcontractor is simple things like payments, or what happens when there's extra work. So a subcontract agreement can be used to put those things into writing and set forth those basic terms; what that subcontractor is going to get paid, what the specific items that are included in their scope are, so if there is extra, we can define what is and what isn't extra, and then how that subcontractor is going to get paid. Are they getting paid on a progress payment, or are they getting paid on a lump sum when it's done?

If something does go wrong, the subcontractor agreement also has the benefit of setting forth how it's going to be resolved. For example, if that subcontractor doesn't finish their work or they get terminated, who's responsible for the cost to complete that work? Another example would be if there's an injury or damages that come from their work, how do we apportion that responsibility? And another example after that would be If something does go wrong and we can't resolve it, what's the procedure going to be? Are we going to go to litigation and spend years in court? Are we going to consider arbitration, which might cost us a little more upfront, but could get to a resolution faster?

The main point is a subcontract agreement is giving you an opportunity to allocate your risks, which allows you to better bid a project. If you are taking on a lot more risk, you're probably going to want to charge a premium for that risk. On the opposite side if you are passing that risk on to your subcontractor perhaps then you might be able to bid at a tighter rate. So a subcontract agreement's big main purpose is to really define things so that we know what's going to happen rather than leaving it up in the air.

DG: Well, so that makes sense. And when somebody's putting together a subcontract agreement, maybe it's the first one that somebody like you is putting together for a business. Is it kind of a, “hey, this one agreement fits all types of work that you might subcontract” or should the business look at more of a focused approach in terms of the type of work that they're subbing out or the type of project that they're on? Would that bring any nuance to the subcontract agreement?

CS: It would. So there's really two answers to your question Drew. First, yes, there are many general provisions that you're going to use through all your different types of subcontractors. Those are going to be those basic provisions like price, payment methods, what's the scope of work, how do we handle change orders, what's that procedure and the notice, maybe schedule and your insurance requirements.

But second, there's going to be some provisions that really are specific to the type of work you're subbing out. So take for example, if you're subbing out work where people are working in the ground, they're doing digging, they're doing trenching, they're planting materials. There's a large possibility that you could have unknown obstructions, whether there's big rocks or boulders in the ground or there's an unidentified utility. You might want to have a provision then that's going to assign who's responsible for those unknown encounters? Is it going to be the subcontractor who's then going to price it higher to deal with their risk of the unknowns? Or is it going to be the general contractor? Or is it going to be the owner? And that's going to affect both your pricing and bidding on the project, but it's also going to affect when that comes up, how do you deal with that dispute? Having that provision in place allows you to have the answer so you don't actually have to have a dispute and go to litigation.

Comparatively let's imagine that your subcontracting out work like roofing or windows or plumbing. Those come with the possibility of a water intrusion claim, there could be a leak there could be a burst pipe. So first and foremost we think well damages from that would probably be covered by insurance but there are other things that aren't and that's going to be those incidentals. For example, if you have a plumbing leak and it's in a residence or in a business, there's a possibility that owner is going to make a claim for loss of use or for a loss of profits because they haven't been able to operate their business. What we would want to then consider is whether or not you should have a consequential damages waiver that essentially says if there's these other indirect costs like the loss of use or like the loss of profits, who's going to be responsible for that? Is that going to be the owner or is that going to be the contractor or the subcontractor that caused the damage? And again, that's going to allocate to you how do you want to price this project? Because your bid is probably going to be affected by how much risk you're taking on. So those are two possible provisions that you might want to make more specific to your individual subcontractors and the type of work that they're doing.

DG: Got it. So obviously having open dialogue with a professional like yourselves in terms of what the project might look like for the business helps to kind of cater to the subcontract agreement or the specific needs of that agreement.

So in general, how often should somebody relook at their, the general provisions of their subcontract agreement that might be unanimous across all of their agreements? Is it an annual thing, bi-annual? Is there a recommendation in terms of how and those things should be re-looked at and revisited?

CS: Well, we generally recommend having your contracts re-looked at yearly. Now, some years there might be nothing to change, but other years there could be. The issue is the law is constantly evolving. So what the regulations are out there, whether it's from the CSLB or it's going to be from decisions from the court, are going to change over the years.

Let's take example, most common thing, pay. In the last several years, we've seen many revisions. Going back, not long ago, if paid provisions were allowed, which essentially said that the contractor and the subcontractor would share the risk that the owner doesn't pay. California has since prohibited those and said, no, that's not reasonable., it's against public policy, we want subcontractors to get paid. So now those are prohibited. Yet I still see them in contracts all the time that haven't been updated.

Similarly, California does allow pay when paid, which says that the subcontractor’s payment can be delayed until the contractor is paid by the owner. We saw just in the last couple of years, the court come back though and find one scenario where it decided to limit those provisions. And specifically, it was a lot of these provisions were being written to say that if the owner and the prime contractor got into a dispute, that the subcontractor had to wait to get paid until that dispute, whether it was litigation or arbitration, was resolved. Courts came out and said, that's not reasonable because it potentially makes that subcontractor who may have nothing to do with the dispute have to wait for payment for even years until that litigation is resolved. So the court said now that “pay when paid” provisions have to be reasonable. So I've been recommending in the last couple of years’ revisions to contracts to define what that reasonable period is.

So the answer to your question is ultimately contracts should probably be reviewed yearly. Some years it's going to be more, some years it's going to be less, but you want to stay up to date with the current codes, the current decisions, and the CSLB rules that are ever changing.

DG: Very nice. Now that makes sense. Last question, last subcontract question for you. So obviously having them is important, making sure that they are catered towards the work that you guys are, that you're putting into place. You know, I think the answer is probably obvious on this, when should that subcontract agreement be signed? But I'd like you to comment on that, but also what are some pitfalls if they're not signed before the project takes off? What are some concerns or what could that create in terms of, you know, future issues or maybe more immediate issues if that agreement isn't in place before the project takes off?

CS: Well, I think starting off, I would say what we've been talking about assigning risk and responsibility is really going to impact your pricing. So I would recommend having those agreements signed early.

What a lot of my contractor clients have been doing is they're doing master subcontractor agreements where with the regular vendors that they're using, they have an overall agreement that sets forth the terms and conditions and their assignment of risk and how they're going to deal with problems that they typically would foresee in an agreement that gets signed long before there's ever a job in place. Then when there's a particular job, they'll issue a purchase order and that purchase order will just incorporate the terms and conditions of that master subcontractor agreement. That's a really good place to be because then when you are bidding on a project, you already know how you are allocating risk amongst yourself, your subcontractor, and the owner, and you can price accordingly.

DG: Yeah. Again, it makes total sense.

DF: Okay. Well, tell us if people need to connect with you, what's a good way to start the dialogue?

CS: Again, thank you for having me here today. I can be reached at my office, it's (714) 451 -7919. Send me an email, that's cksetc@lanak-hanna.com or you can go to our website, which is Lanak-Hanna.com.

DG: Thank you again and thanks to our listeners for joining us and we'll see you next time.

Continue to Part II

Recommended Strategies to Open Capacity for your Bond Program

Author, Matt Gaynor, Director of Surety, Rancho Mesa Insurance Services, Inc.

Most of our contractor bond accounts are provided a single bond/aggregate capacity program to determine the size of projects they can bid and the amount of capacity that is available in the program for future projects. The most effective way to ensure you have available capacity for an upcoming bid is to communicate with your bond agent well in advance of the bid date to ensure the project will be approved by the bond company. On certain occasions, an upcoming project may put you over the top of your approved capacity. This is the time your agent must work hard on your behalf to represent to the bond company why this project makes sense to add to the program. 

Here are several useful strategies to make this happen:

1. Prepare a work in progress schedule on a quarterly basis and provide updates as work progresses to give your bond agent the best estimate of your cost to complete as of a certain period. This is important because the bond company will allow additional runoff to subtract from your current backlog to free up capacity prior to the actual start date of the new project.

2. When submitting your bid request, include a job cost breakdown on the new project and list the percentage of labor, materials, equipment, subcontractors, overhead and profit.  Provide additional explanation of any key elements (for example, if a certain subcontracted trade represents a large portion of the project) and risk transfer protocols used to pre-qualify this particular subcontractor.

3. Have a status report completed by the owner whenever a bonded project is completing. Your agent can provide you this document. The bond company uses this information to remove that project from your backlog.

4. Have a discussion with your bank to determine if they can increase your line of credit to ensure available cash in support of anticipated costs during the initial few months of the new project.

5. Consider loaning personal money to the company for a short time period to provide additional working capital or equity. The loan may need to be subordinated to the bond company to ensure it is not paid back until certain conditions are met.

Both your agent and the bond company only generate income when they issue bonds to support your projects. Therefore, all parties involved want to try and find a way to allow you to add good projects to your bonded backlog.

If you would like more information to discuss additional ways to increase your bond capacity, please contact me at (619) 937-0165 or mgaynor@ranchomesa.com.

OSHA Tips to Protect Workers During the Holiday Season

Author, Jadyn Brandt, Client Communications Coordinator, Rancho Mesa Insurance Services, Inc.

As the holiday season approaches, many businesses will experience an increase in demand that can put an extra strain on a workplace and its employees. The surge in work often means more safety challenges for an employer.

To deal with the additional strain, employers may be hiring new or seasonal employees, bringing in additional volunteers, and/or expanding their hours. Despite these changes, safety should still remain a top priority. Employers must work to train and prepare their employees and volunteers to recognize and prevent job hazards and enact safe work practices.

The Occupational Safety and Health Administration (OSHA) has shared a list of nine safety tips that employers should implement for the holiday season. Here’s what they recommend:

1. Train workers on safe practices in a language they speak and understand
It’s important that all workers are aware of necessary safety practices, rules and regulations. This can include basic safety policies or industry-specific safety trainings. Communicating these policies clearly and effectively is equally as important. Employers should regularly remind employees of safe practices in meetings and give trainings when needed.

2. Provide hands-on training for young and new workers on properly using equipment
New or seasonal workers should be given thorough explanations on all tasks they will perform. This is especially important if a worker will be operating equipment in a warehouse or will be sent out on deliveries. Encourage workers to look out for one another and assist newer hires if needed.

3. Delivery services and warehouse workers should wear bright, visible clothing
Longer hours could mean more workers will work late nights or early mornings. For some workers, that could mean part or all of their shifts are done in the dark. Be sure all workers are wearing the proper clothing and safety gear in order to be sure they are visible in all conditions.

4. Prevent injuries by properly stacking materials and making sure workers stand clear when doors are opened for unloading
Stocking inventory or loading and unloading delivery trucks can be dangerous if workers are unaware of proper lifting and handling techniques. Workers should be trained on these proper techniques before handling heavy items. Remind workers to stand clear of opening doors when unloading delivery trucks, to prevent any materials that may have shifted around in transit from falling on and injuring a person.

5. Create a detailed and flexible staffing plan to help reduce workplace stress
Accommodating everyone’s time-off requests during the holidays can be difficult. And workers may experience heightened stress due to the increased workloads and tight deadlines. Be mindful of each person’s wellbeing, and avoid overworking them during the holidays. Encourage taking regular breaks, and provide access to mental health resources. Keeping a detailed schedule will also help avoid any confusion on busy or unusual days.

6. When large crowds are expected, prepare an emergency plan
The holiday season means many businesses—especially in the retail or community services industry—may experience an increase in visitors. Whether you are a landscaper at a shopping mall or providing meals and health services to the community, larger crowds bring unique safety hazards, from crowd control to fire or medical emergencies. It is important to have a clear and well-communicated emergency plan in place to deal with these situations.

7. Make sure entrance and exit location signs are visible
Employers should ensure that all workers are familiar with emergency exits and evacuation routes. An evacuation plan should also account for disabled individuals, so that everyone can leave safely if necessary. Use clear signage to mark first aid stations, entrances, and exits. A communication system—like an intercom—should also be put in place to quickly convey information in place of emergency.

8. Encourage workers to report any safety and health concerns
Foster a workplace culture that is open to the reporting of any workplace accidents or health concerns. Create a clear and accessible reporting process, and be sure all workers are made aware of that process at the start of their employment. Make it clear to workers that they will not suffer retaliation if they do report an issue. If an issue is reported, act on it promptly and effectively. Staying aware of and prepared for any potential hazards or health problems can be a huge benefit to you and your team in the long run.

9. Remember: Seasonal workers have the same rights as full-time workers
During this time, many businesses may hire seasonal employees to meet increased demand. But it is important to remember that seasonal workers are entitled to the same rights and protections as permanent employees. Seasonal workers should not be excluded from safety trainings or benefits, and should be treated the same as full-time workers.

By following OSHA’s nine tips for holiday worker safety, businesses can help keep employees safe, healthy, and organized through the holiday season. Proper safety training, emergency preparedness and fostering a climate of safety can help keep a business running smoothly through the holidays. More safety resources and trainings can be found on Rancho Mesa’s SafetyOne™ Platform.

Umbrella vs. Excess Liability: The Key Differences Contractors Need to Know

Author, Sam Clayton, Vice President, Construction Group, Rancho Mesa Insurance Services, Inc.

When reviewing insurance requirements that contractors receive from municipalities and/or general contractors, two lines of coverage that are often misunderstood are umbrella and excess liability. These terms are commonly interchangeable in the contract, but have subtle differences. In addition, the limits required by contracts are increasing significantly.

Excess vs. Umbrella

An excess liability policy has two primary functions: it provides excess limits above the underlying liability insurance limits and replaces underlying insurance limits as aggregate limits are exhausted; the excess policy will be subject to the same coverage terms, conditions and exclusions as the underlying policies. This is what is called follow-form.

A commercial umbrella liability policy has three primary functions: it provides excess limits above the underlying liability insurance limits; replaces underlying insurance limits as aggregate limits are exhausted; and offers broader coverage than primary policies for certain losses which would be subject to an SIR or self-insured retention.

Why are they important?

A commercial umbrella or a properly structured excess policy will sit above a contractor’s existing policy’s general liability, auto liability and employers’ liability limit. This protects contractors from large unexpected losses that can have devastating financial impact on the company.

With the dramatic rise in costs of insurance claims the last few years, either from social inflation or third-party litigation funding, multi-million dollar settlements are becoming more frequent. For example, if one of your employees is in an auto accident that causes severe bodily injury to multiple people, the legal and medical costs incurred could very easily exhaust your primary auto liability limit very quickly. Umbrella or excess policy limits would be available cover those losses.

So, when reviewing a contract, pay close attention to the umbrella or excess insurance requirements, and ensure that you understand the subtle differences of how they can impact your bottom line if there is a claim.    

To learn more about these specific coverages and how they can be incorporated into your current insurance program, reach out via email to sclayton@ranchomesa.com or (619) 937-0167.

Cal/OSHA Releases Top Safety Citations for 2024

Author, Jadyn Brandt, Client Communications Coordinator, Rancho Mesa Insurance Services, Inc.

The Occupational Safety and Health Administration (OSHA) recently released its Top 10 List of Most Frequently Cited Standards for fiscal year 2024.

Each year, OSHA compiles a list of the most common workplace safety hazards. Understanding these new numbers can provide insight for employers on potential safety issues within their organizations. While OSHA’s list includes the top ten citations, we will focus on the top five critical violations.

1. Fall Protection

Fall Protection (1926.501) was once again the leading cause of OSHA workplace violations. The administration reported over 6,000 violations this year; significantly more than any other reason for citation. There are a number of ways one can incur a fall protection violation including a lack of fall protection such as safety harnesses, hand rails or toe-boards. Regular training on fall hazards and how to properly use fall protection equipment is essential to keeping employees safe while at work.

2. Hazard Communication

Hazard Communication (1910.1200) violations were the second most common reasons for citation. OSHA guidelines require the hazards of the chemicals that a company produces or imports must be, “available and understandable to workers.” In order to avoid citations, employers must train employees on how to handle hazardous chemicals correctly, and must have safety labels displayed in the workplace.

3. Ladders

The number three violation for the year was Ladders (1926.1053). There are numerous requirements for the use of ladders on a job site, which can be found on the OSHA website. Those requirements range from the condition and spacing of ladder rungs, placement and weight limits, and manufacture date. Employers should ensure that all ladders are regularly inspected and maintained, and should make sure employees are trained on how to safely use a ladder on the job.

4. Respiratory Protection

Respiratory Protection (1910.134) was the fourth most-common type of violation. Oftentimes, contaminants in the air of a jobsite require respiratory protection. Some common contaminants that would require specific protection include harmful dusts, vapors, gases or sprays. OSHA also, “requires the employer to develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use.” That program must then be administered by a trained program administrator.

5. Lockout/Tagout

Lockout/Tagout (1910.147) violations were fifth on the list of the most common safety violations for the year. These violations occur when the proper procedures for controlling hazardous energy releases are not followed when servicing machines or equipment. Proper lockout/tagout procedures are a must when performing machine maintenance, and employers should be sure to train their employees on how to protect themselves.

OSHA tracked safety violations beginning on October 1, 2023 and ending on September 5, 2024. The full list of violations include:

1. Fall Protection—General Requirements (1926.501): 6,307 violations

2. Hazard Communication (1910.1200): 2,888 violations

3. Ladders (1926.1053): 2,573 violations

4. Respiratory Protection (1910.134): 2,470 violations

5. Lockout/Tagout (1910.147): 2,443 violations

6. Powered Industrial Trucks (1910.178): 2,248 violations

7. Fall Protection – Training Requirements (1926.503): 2,050 violations

8. Scaffolding (1926.451): 1,873 violations

9. Personal Protective and Lifesaving Equipment – Eye and Face Protection (1926.102): 1,814 violations

10. Machine Guarding (1910.212): 1,541 violations

Violations of any of these OSHA guidelines can put employees in dangerous situations, and can lead to significant consequences for an employer. If the proper safety precautions are not put in place, serious injury and even death can occur on a worksite. Failing to comply with the administration’s regulations can also be incredible costly for an employer. The maximum financial penalty for an OSHA violation  is currently $16,131 per violation, and the maximum penalty for willful or repeated violations is $161,323 per violation.

Rancho Mesa’s RM365 Advantage Safety Star™ program and the SafetyOne™ platform are both great resources to train employees on the top OSHA safety violations.

If you have questions about how best to prepare your team and implement necessary safety plans, contact your Client Technology Coordinator.

Maximizing the Value of Your Next Loss Control Visit

Author, Rory Anderson, Partner, Account Executive, Rancho Mesa Insurance Services, Inc.

There are a few different reasons for a carrier to schedule a loss control visit. Sometimes, a carrier may want to perform a loss control visit before they quote your insurance. However, for the purpose of this article, I’d like to focus on the loss control service offering provided directly from your current insurance carrier.

From the perspective of a tree care business owner, uncertainty, skepticism, and hesitation are often the most common initial reactions to an insurance carrier loss control visit. However, these visits should not be seen as a negative process. Instead, they present an opportunity for tree care business owners to enhance safety protocols, reduce risks, and ultimately improve their insurability.

Loss control specialists have dedicated their careers to understanding risk and safety, and are committed to make the workplace safer. By engaging with the loss control specialist and reviewing their recommendations as constructive guidance, tree care companies can make valuable changes that not only improve their risk profile, but also potentially lower insurance premiums.

To get the most out of a loss control visit:

• Set clear objectives. Establish goals and determine what you would like to accomplish. Communicate your objectives of the visit with your team members and the loss control representative. It is a good idea to engage your key employees and involve your team. Your safety officer, fleet manager, and crew leaders should be present. This will encourage participation and help cultivate a culture of safety.

• Share information.  Have your safety programs, training records, maintenance records, and any other safety information ready to share. Discuss any safety incentive programs and/or initiatives set forth by management.

• Maintain an open mind and practice humility. Welcome feedback and approach the visit with a positive attitude. View the loss control specialist as a partner and be open to recommendations.

• Conduct a walkthrough and jobsite visit. Tour your facility and visit a jobsite, unannounced. It is best to drop in on your crews without them knowing you will be there. This will provide real insight into your operations, accountability, and identify gaps in safety compliance.

• Document recommendations. Most of the time, your loss control representative will generate and send to you a report for your records. However, if that is not the case, make sure to record key points and suggestions.

• Create an action plan and prioritize changes. After the visit, review the recommendations with your team and prioritize the changes and completion of your plan within a certain timeframe.

• Build a relationship. Stay in touch after the initial visit and maintain communication with the loss control representative to discuss ongoing safety improvements and updates.

Maximizing a loss control visit strengthens your business by improving safety, reducing insurance costs, and maintaining a long-term relationship with your carrier partner. It is easy to view loss control visits as a chore or another task to check off the to-do list, but doing so overlooks the valuable insights the loss control representative can offer. Instead, try to view it as a partnership so you can leverage the representative’s knowledge to improve workplace practices and create a safer and more efficient operation.

To discuss how your tree care company can make the most of a loss control visit, contact me at (619) 486-6437 or randerson@ranchomesa.com.

Employer’s Guide to Handling Cumulative Trauma Claims

Author, Casey Craig, Account Executive, Rancho Mesa Insurance Services, Inc.

A growing thorn in employers’ sides has been the rise of worker’s compensation cumulative trauma (CT) claims. Cumulative trauma refers to the ongoing psychological and physical injuries that accumulate over time, often resulting from repetitive stress or exposure to adverse conditions. Employees missing time can lead to larger workers’ compensation claims, lower moral, and less efficiency. It can be easy as an employer to take a defensive stance and fight each one of these, but there are a few factors that must be taken into consideration prior to deciding if you should settle or challenge these claims.

Not every CT claim should to be fought. As hard as it is to hear, you can win the battle but lose the war. Sometimes the cost of gathering information, medical reviews, time spent away from operations and litigation can add up to more than it would have cost to settle these claims. This is extremely tough to achieve in construction as the burden is on the employer to prove that there is no way that their stated injuries could have happened while working for you.

Employers can proactively fight CT claims by staying ahead of the exposure as much as possible. This means making sure your workers have the safest, most ergonomic-friendly environment possible. Stress and repetitive motion are two of the largest causes of CT claims. Trying to keep your employees from doing the same repetitive task over and over is extremely important in keeping both moral high and frequency of claims lower. However, this can be difficult for most construction companies with the need to perform the same motion over and over, but it is necessary to have your employees switch up tasks if at all possible.

This does not mean that every cumulative trauma claim should be settled either. We are seeing younger and younger employees filing these once they have been let go or have chosen to leave. These post termination claims typically come attached with an applicant attorney and can include multiple body parts being named that appear initially as fraudulent statements. If it is determined that there truly was no record of injury and they are able to perform all normal duties, fighting the claim may make sense.

Each claim is unique and needs to be handled as such. Relying on your insurance broker and carrier claim consultant for guidance is critical in staying focused on the facts, not the frustration and emotions that often accompany these types of claims. While settling a claim that could be fraudulent can be frustrating and does have an impact on your experience modification rate, it can often be the best path towards minimizing costs and maintaining lower loss ratios that lead directly to lower renewal premiums, which is the ultimate goal.

If you have any questions about how to handle cumulative trauma claims, reach out to me at ccraig@ranchomesa.com or (619)438-6900.

How Healthcare Staffing Agencies Can Prevent Claims

Author, Jack Marrs, Associate Account Executive, Rancho Mesa Insurance Services, Inc.

Healthcare staffing agencies play a vital role in maintaining patient care standards. That is why it is critical for staffing agencies’ employees to be properly vetted, kept informed, and trained prior to being placed to reduce the likelihood of claims. Preventing such claims requires a collaboration between the healthcare staffing agency and the facility where employees are being placed. Healthcare staffing agencies can take steps to prevent claims and protect their operations.

Employee Screening

A best practice for preventing claims is to ensure that the healthcare professionals being placed are highly qualified and have the required credentials. Proper vetting includes verifying licenses, certifications, and prior work experience. If the potential employee is not properly screened and is hired, it not only is putting the patients in danger but it can result in malpractice claims.

Collective Intelligence, a professional screening service, states that “up to 30% of job applications contain false statements.” The company notes that “by using a healthcare professional screening service, you can rest assured that you are mitigating the risks associated with theft, negligent hiring lawsuits, poor employee retention and fees associated with non-compliance.”

Properly screening potential employees can reduce the risk of unintentionally bringing on unqualified people who could put the organization at risk.

Clear Communication of Job Roles and Responsibilities

Miscommunication or misunderstanding of job roles can lead to situations where healthcare professionals make decisions outside of their job roles. This not only puts the patient at risk but can also expose the agency to liability claims. To prevent this, the agency must clearly outline the roles, responsibilities, and limitations of the healthcare professionals that are being placed in the facility. Healthcare staffing agencies and the healthcare provider that hires them need to make sure that everyone involved knows exactly what the healthcare professional is responsible for at the facility. 

Effective Safety Training

The healthcare industry is physically demanding, and healthcare professionals are prone to injuries, whether from lifting patients, long shifts, or a slip and fall. Healthcare staffing agencies are also prone to high turnover which can lead to workers being less familiar with their workplace and safety protocols, thus increasing the risk of accidents.

Healthcare staffing agencies must protect themselves from workers’ compensation, general liability, and medical malpractice claims. One way to do this is by partnering with the facilities where the employees are placed and formally agree to share responsibility for training and safety.

While staffing agencies should provide proper training, client facilities should also offer site-specific training related to their own operations and protocols. Clear agreements between the agency and the client facility regarding training responsibilities will help minimize the risk of claims.

Preventing claims in the healthcare staffing industry is an ongoing process that requires attention to detail, ongoing training, and partnerships with healthcare facilities. By taking these steps, agencies can protect themselves from the financial damage associated with claims and the general safety of their employees.

To learn more about how your healthcare staffing agency can reduce risk, contact me at jmarrs@ranchomesa.com or (619) 486-6569.

Navigating Halloween Costumes and Celebrations in the Workplace

Author, Jadyn Brandt, Client Communications Coordinator, Rancho Mesa Insurance Services, Inc.

Halloween is right around the corner, and while workplace holiday celebrations offer a chance for creativity and fun, there are a few things to keep in mind to avoid any HR violations.

Companies are not required to have a costume policy in place, but employers should consider instituting one, if they believe costumes could cause an unsafe situation for employees or clients. Examples of items that could lead to safety issues include fake blood, weapons or oversized props. Setting clear guidelines can help employees navigate the dos and don’ts of dressing up, and address the use of items that an employer determines to be a safety hazard.

Employers should also remind team members that professionalism is still a priority, while allowing for festive self-expression. Offensive or inappropriate costumes should not be worn to work. Outfits that show too much skin or depict religious, cultural or gender-related stereotypes are best avoided while working. It’s also best to steer clear from political costumes in the workplace.

It’s always good to take a proactive approach and remind employees of these rules and policies early on, especially if Halloween falls on a workday. Employers should send out a company-wide reminder highlighting workplace policies and guidelines to be sure the holiday festivities don’t make others feel uncomfortable. It’s also important to establish a process for reporting and handling issues, if an incident does occur.

Although plenty of people will enjoy participating in office costume contests and parties, employers should allow these things to be optional. If an employee chooses not to take part in Halloween activities, it may be for cultural or religious reasons, and it’s best not to push them to participate.

Rancho Mesa’s RM365 HRAdvantage™ is a great resource for Rancho Mesa clients who have additional questions about Halloween costume guidelines, how to strike the right balance between festive spirit and appropriate attire, or how to respond to a potential issue.

Exploring Innovation and Problem Solving in the Commercial Construction Industry

Kevin Howard, Partner with Rancho Mesa, interviews Jeremy Dentt of Dentt Properties Inc. and explores a range of topics relating to innovation and problem solving in the commercial construction world.

Kevin Howard: Welcome to StudioOne™. I'm Kevin Howard, Partner here at Rancho Mesa Insurance. Very excited to have our guest today, Jeremy Dentt. Jeremy, how are you doing?

Jeremy Dentt: I'm good. Thanks for having me. First time podcaster here.

KH: First time podcaster. I feel privileged. Jeremy Dentt is the owner of Dentt Real Estate Services. He's been specializing in the development, management, leasing, and sales of commercial real estate since 2004.

Jeremy, you mind if I go through your resume really fast? Geez, Louise. 19 years of experience in commercial real estate, which officially makes you a guru. San Diego State Aztec, and I'm looking through the development and management, you just have a ton of different types, a multitude of developments: commercial, habitational, gas stations. Which one of those was your favorite?

JD: I would have to say that my favorite is industrial. It's easier, four walls, some concrete, less chaos to the mix of the development where gas stations, carwashes; lots of moving parts, lots of different subs and smaller lots to build on.

KH: Makes more sense, it's more concise, less of a busy zone. And that would be your ideal build.

Well, we're going to go over some commercial real estate topics that I think.a lot of listeners are maybe asking themselves, you know, “What’s going on out there?” There’s been a ton of change since COVID, a ton of change nationally, internationally, so, just really excited to dive into this.

Let’s start with this question; if you could solve one major challenge in the commercial real estate industry today, what would that challenge be and what would you do?

JD: Well I think the biggest challenge we're still facing in commercial real estate, and just the building industry in general, is the escalating costs. We had huge spikes during COVID and we were hoping for a softening post-COVID but, some things have slowed down. It's still challenging to get material on time, costs are still going up, specifically switch gears are a year out from manufacturing to delivery to the site which presents just a major challenge to getting a project out of the ground.

KH: So you're estimating for a project to be, you know, six months, seven months, and you're way behind just because of how the economy is just so slow right now?

JD: Yeah, the supply chains are still on a significant delay for certain parts. Most of our projects that we started in the last three years, we ordered some of the important items like the switch gear and any large equipment six, seven months before even signing up a contractor.

KH: Right, frustrating, but what would you do to solve that problem? You know, you have a magic wand and you're like, "Hey, this is the big fix."

JD: That's a great question that I don't think there's one easy answer. I think having a little bit more manufacturing in the States would help. Some of the shipping logistics was the biggest challenge, getting it across seas. If we had more opportunity to manufacture some of these products locally, I think it would be easier for us to streamline the process.

KH: Totally agree. Your career spanning, you know, 20 plus years, what was the defining moment if you could just name one in your career so far, as far as a commercial real estate developer?

JD: Yeah, I think for me, I started my own project in 2019. It's an industrial complex, seven buildings in total, broken up into two phases. In the first phase, we got out of the ground in early 2019. And as you know, in 2020, March, we hit COVID and the world shut down. And I specifically remember the moment in this development when I was sitting there looking at my Excel spreadsheet with all my costs; my loan, which was a personal guaranteed loan of over $6 million and the world shutting down and wondering, what do I do next? And there's actually a funny picture of me laying in my backyard face down in, you know, March, where it's still 75 degrees here, I'm outside lying face down with a Patagonia jacket on just contemplating the decisions I've made.

KH: Yeah. “Where do we go from here?” Perfect timing, right?

JD: Yeah. I think for the defining moment side of it, it made me realize that I'd worked on this project since 2012 and we timed everything as best as we could. But there's so many factors in real estate and just anything you do that can come out of nowhere, that blindside you. And so having important economics to the deal is more important than ever because tomorrow something can change. And in that instance it was a global pandemic that I did not factor in my investment performance. But it was still a great project in a great location and luckily things turned and we did just fine but it was certainly one of those moments where it constantly changes your risk assumptions and how much risk you're willing to take on given that nothing's guaranteed.

KH: Right. Nothing is guaranteed. And obviously, that project is done. I've seen it. It's beautiful.

JD: It's done. It's insured by you, which is great. It's financed. So, yeah, it turned out to be a really good project for us.

KH: It worked out. Let's switch over to some innovation conversations. What innovations are you most excited about? I know there's just so much change with AI and, you know, remote workers What are you excited about when it comes to innovation?

JD: Well with innovation and construction and, you know, development of commercial property I've been really tracking more of the AR technologies that are coming out. Specifically, I've been working on a lot of construction projects where I'm out there, kind of old school, with a set of plans looking at details making sure the contractor built it right and I've lately come across these Apple goggles.

KH: Apple Vision Pro, the augmented reality. So cool, right?

JD: The augmented reality. Yeah those I really like and I've been tracking some of the programs that you can get where instead of the old school way of walking around with blueprints and checking the details making sure it's getting built right, the AR goggles you can build in the architectural plans with all the overlays of all the MEP sheets. And instead of looking down, they're essentially cast in front of you in the building and so if you had questions about, you know; the structural components behind it or what's behind that drywall or is that plumbing line supposed to be there? The plans are in front of you in these Apple goggles.

And I just think about how much efficiency will be brought to the construction industry when you're essentially staring at the plans while standing at the project. I think it's going to be huge for the construction industry in terms of not missing things. For instance, like right now I've got a project that I'm really concerned about some of the waterproofing and I can't get those layers pulled out. And I'm not sure that the details perfectly followed because there's some missing elements there. So now we're going to pull back some of the panels and make sure it's all there. However, if we had these technologies at the start, it'd provide one more opportunity for them to make sure that they're getting it right.

KH: That layer of comfort for you, right? Because you can see it.

JD: Absolutely.

KH: Yeah, I think that AR is definitely, it's going to come fast. It's going to affect how we train everybody in different industries, but it's definitely going to create more accuracy. You know, you can see it. It's right in front of you.

JD: Yeah, the technology doesn't just span construction. We're seeing it every year in the property management. You know, my company is unique where we do development, we do property management as well. It actually, the property management feeds itself from the development because understanding how the building is built is as important to managing it as well.

But, the technology there is constantly changing. Just coming into your office, looking at these elevator systems that have negative air systems now post-COVID, self -cleaning buttons. The property management software is changing, the connectivity between you and the tenant is easier than ever. It's really about streamlining that connection. And I always tell my clients that we incorporate these new technologies to connect us to the tenant, to get the rents paid, to get the tenants needs taken care of, but it's not to lose that connection with the manager. These types of technologies actually free up our time more so that we can be connected to the tenant base, which is important. They want to know their manager; they want to feel like they're being heard. And these programs are to kind of get rid of the minutia and streamline whatever it is, maybe a maintenance call, getting them connected to our vendor so that we can open lines of communications for other things.

KH: Right. It frees up the opportunity cost for you to go do other things, plug in your time. I mean, those are the advancements that we're so excited about.

JD: Yeah.

KH: I'm imagining listeners that are interested in commercial real estate would have some questions for you having to do with the future. What are you seeing in 20 years from now? You know, 20 years ago, if we talked about AR, augmented reality, we'd be like, “What?”

What's on the horizon and what would be really cool?

JD: Well, I think that one's more of a challenge for guys like you and I that are born and raised in San Diego. Perfect example, 25, 30 years ago, downtown San Diego was never on my radar. I didn't think there was any opportunity to develop. As you know, when we were kids, it wasn't the safest area to go. For me, I remember going down to Old Spaghetti Factory and my pops would drive up to that front door, open the minivan, say, “Get out, go inside.” Then he'd come in hour later, said, “Wait at the door,” minivan comes around, open, jam in. That was my understanding depiction of downtown, right? And then all of a sudden this ballpark comes in and everything explodes down there.

I think it's part of what I'm talking about of what 30 years looks like, density, right? We are out of land in San Diego. Single family homes, building them is a challenge. We just don't have big tracks to put it together. You'll get your small pockets here and there, but the reality is, is most of our housing is going to come from density. And you've seen it in downtown San Diego. You see constant sky rises going up. You're seeing it more in North Park than ever before with the cities updating their community plans for denser locations near freeways. And so I think that the 20, 30-year outlook for San Diego is just a completely different sky rise. The single family huts that we grew up in East County, all those areas will have to accommodate growth, and we’re out of land. So how do you do it? You go up.

And I think that's honestly, we're seeing it even in industrial. It hasn't hit San Diego, but in markets like Seattle, Oakland, New York, they're building two and three story industrial buildings now. Those same markets are constrained with land. And so how do you create more industrial space?

KH: Go up.

JD: You go up. It's expensive, but at some point it does make sense. So I think just a vertical skyline is going to be the future of San Diego.

KH: Right, and that reminds me of the book Ready Player One that I asked you to read years ago.

JD: Sure, what a great recommendation.

KH: And that story, the stacks are stacked high because of that same problem, right?

JD: Sure, hopefully, we don't lose the social interaction that is lost in that world, but the density, I agree.

KH: We shall see. We'll listen to this podcast later on in life and say, "We were way off," or "You nailed it." So, we've talked about innovation. We've talked about the future of commercial real estate, what are you doing for risk management? What are you doing out there to really mitigate major risk?

JD: Yeah, I think that's one of the biggest things where we constantly look into. First things first is hire a good insurance agent, like you, to ensure the entire portfolio and be as cost effective as possible.

At a property level, we're encouraging all of our owners and looking at our own assets and trying to add cameras. I think from a perspective of risk for litigation, having captured more data on your building; what people are coming and going, what happens when they're at their building, I think is one of the best things that you can do. It doesn't help proactive. Of course, we got to stay proactive with getting eyes on our property, checking to make sure that everything's in good order. We don't want broken concrete. We don't want tripping hazards, all the kind of normal checks. But inevitably things are going to happen, right? And so mitigation of that risk after it happened. Well, not to say anyone lies about trip and fall on a property, however, having an understanding of what happened can be a defensible situation for us. And so having cameras at our properties to pick up on any activity of what may or may not happen is something that we're trying to roll out across our portfolio. And we do it on our large properties, which cost a little bit more because you have a bigger area to capture, all the way down to the properties that we represent that are one and two units. And this can be achieved with even installing a ring camera that has the ability to just capture an area.

And what we found is in these situations if something arises, we understand what happened so we can defend or acknowledge the situation and oftentimes it's just using it as a defense opportunity. The risk perspective is, we got to hand it over insurance and then our insurance premiums go up, right? So, doing as much to the building as possible to protect us and keep our claims low.

KH: I think it's especially very timely as far as adding a control, adding something to invest in that will just pay benefits over the long run If you do have a claim like that. It’s the same with commercial auto right now like, “Hey, so what happened?” Is it he said, she said or oh, “Here's the footage, we have it right here.” So that's really smart.

JD: Great point. Yeah, it's no different than insurance policy to us. It helps after the fact of collecting the data and understanding. And on an amenity base for tenants, they're actually finding a lot of value in it.

So we've got two high traffic buildings, one in Chula Vista and one in Escondido. And now multiple times I've provided footage for a tenant or a client of the tenant that reached out and said, "Someone backed up into my car." And I provided them the make, the model of the vehicle and they were just blown away like, "This is fantastic. This is what my insurance needed. They know it's not me.”

KH: I love it.

JD: What they do with it, I don't know, but it at least helps them on their side.

KH: Right.

JD: And so, we've been really trying to push for a lot of that.

KH: This is really innovative and can't cost too much either, right?

JD: It's coming down in price. I remember when I started, you would look at it and it just didn't make financial sense. But with the wireless connectivity, which is the most challenging part, because you don't want to be running wires 600 feet down the building, right? In a conduit, it all starts adding up. But with the new wireless capabilities and the quality of these videos, it's cheaper than it's ever been.

You know, I do all these things, right? And I put in all these checks and balances for my buildings. My most recent project, that you're aware of, is the ESFR rated fire system. The best you can get. If anything catches fire there, that fire system is going to suppress. But, the industry in general, every year, not every year, I should say the last couple of years, we've seen it premium spikes. And the comments have been, “Well, there's been a lot of wildfires, there's been floods.” Nothing that's been extremely detrimental to my properties or in my location, but my premiums continue to go up. I'm curious is why are outside events affecting my properties?

KH: That's a really good question. I think that, you know, we see premiums go up and we're wondering, “Hey, time out. My portfolio was not affected, you know, I'm so far away from these fire zones.” In reality, you know, I have some statistics in front of me. In 2023, 7,127 wildfires. The year prior, 7,667 wildfires. Both years ranging $10 billion to $ 15 billion and paid out insurance costs.

So, your insurance companies, they're buying reinsurance. They're buying insurance on top of insurance. Those reinsurers, they're getting killed. Hurricane Milton, for example, has an estimated $60 billion payout. So when we have these disasters internationally that are taking a huge hit and these re-insurers are taking a huge hit. The pressure passes down to the insurers and ultimately the consumer, right? So we'll see the effect of Milton and Hurricane Helene. But that's the long and short of it is you can have the best controls in place, but because of what's going on with natural disasters, Unfortunately, you're seeing the effect.

And then one more added layer is the cost of goods. Like you mentioned, you know, gas prices being up, money costs more. If there is a situation where a building has to be rebuilt, it costs way more now than it did 10 years ago.

JD: Sure.

KH: So you combine those two together and, you know, that's why we're seeing premiums go up. And the best way for us to really help you fight, you know, at commercial real estate portfolios, you know, fight down those costs, is to communicate early with your insurance agent, make sure they know everything about those controls that you're talking about. Do you have the cameras? And what else are you doing that really helps us mention that to the marketplace and find savings where we can find savings?

JD: So my mitigation of risk can transfer over to their mitigation of risk and hopefully, maybe move the needle of premiums?

KH: I mean, for example, we talked about property premiums going up. General liabilities are usually a good portion of your total insurance costs. Can we push that down? Should we raise the deductible? Are we fighting for the best rate on that? We got to fight where we can fight right now when we have no control, we're completely powerless over what's happening in the property marketplace.

Similar to homeowners right now that live in these fire zones, paying five, six, seven thousand dollars a year in premiums. They weren't expecting that. They didn't budget for that. So we have to just hold tight, be as creative as possible, and really dig deep as far as how we market your account and how we fight for credits.

JD: Yeah, I agree.

KH: We've covered a lot of ground here. We've talked about how you're mitigating risk. We've talked about the implementation of new technology. With everything that you have under your belt, who can you help right now? Who's out there that might need your services?

JD: So our focus is twofold. We're looking for clients and partners that have land or a building that has some type of value-add lift that needs someone with expertise of construction, ownership, and management. And then also over the past five years, we've added multifamily into our portfolio. Which, the landscape of San Diego has changed from a few small developers and managers to multi-billion dollar companies. And so being just focused in one silo of commercial real estate presented challenge. So we pivoted and took what we experienced in commercial real estate, which is a higher level of care and trust for a building and added that to our multifamily portfolio.

So there's a lot of families out there that are self-managing their own portfolio, whether it's a three unit, four unit or a couple hundred units that the family was doing on their own. They're reaching that point of retirement where that building--it makes a nice cash flow for them--and to give up that management fee to shed all risk and just the risk of everything that's constantly changing. They don't have to stay on top of anymore giving passing that baton over to a company that stays on top of it works with the right people, the right insurance, the right GCs to keep that building running healthy for a long time is who we're really looking for. Someone that we can form a relationship with. We're not just there for just the management. We want to be a partner to it and provide them the highest level of service that we originally started our roots in, which is commercial real estate.

KH: Right. And it sounds like you'd bring a real peace of mind in that scenario where somebody's kind of at the end of where they want to manage their property and they want to hand it over to a pro.

And I'll vouch for Jeremy. I've known Jeremy my entire life. He's such a good guy. I really truly believe in what you're doing out there in the community for San Diego. Jeremy also contributes his time to Miracle League, which is a fabulous, very important part of San Diego as far as a nonprofit. And I'm just so proud to be your friend.

JD: Appreciate that. You know, we're here to help. I understand management comes at a cost. Oftentimes there's an opportunity to offset that expense that you see from management fees. So we're really pushing for families and owners that, looking for retirement, that want to hand over their asset that they worked really hard. And we're going to honor how hard they work to make that deal and to hold it for so long and carry out that legacy of management for them.

KH: That's a good point. It's a very good point. Well Jeremy if somebody wants to reach out to you. How can they get ahold of you?

JD: Yeah, we can attach my email to this post. It's jeremy@denttprop.com Happy to help.

KH: Very cool.

JD: Thanks so much for having me.

KH: Thank you for coming to StudioOne™.

JD: Great introduction to my first podcast.

KH: There you go. Appreciate it.

JD: Thanks.

Preparing Your Company for Winter Weather

Author, Jadyn Brandt, Client Communications Coordinator, Rancho Mesa Insurance Services, Inc.

Winter is on its way, and companies are preparing for the colder months still ahead. Lower temperatures, heavy rain, and illnesses caused by the cold can all take away from the safety and efficiency of a business or job site.

Cold-weather related incidents are preventable if the proper steps are taken to ensure employee safety. That’s why it is important for employers to take necessary precautions, and prepare their employees for the seasonal changes.

To prepare for the winter weather, supervisors should be sure their workers are wearing the proper clothing in order to reduce body-heat loss, and are staying dry as much as possible; wet clothing can chill the body rapidly. It’s also important not to ignore shivering. Even if an employee says they are fine, persistent shivering is a sign it’s time to return indoors.

In addition to the cold weather, heavy rains, dense fog and substantial snowfall can decrease visibility on the job site, and on the road, which increases the likelihood of accidents with equipment or vehicles. If it is raining, the best thing to do is stay off of the roads. If avoiding the roads is not an option, be sure vehicles are equipped with properly inflated tires that are not bald or badly worn. This will improve traction and reduce the likelihood of losing control of the vehicle.

These are just some of the ways companies can mitigate weather-related incidents. If an accident does occur, SafetyOne™ users can complete an incident report mobile form. A tutorial on how to complete a mobile form can be found on the Rancho Mesa website. To help prevent accidents caused by a mechanical failure, SafetyOne users can file an inspection report for vehicles in need of service using the “Motor Vehicle” observation. A tutorial on how to complete an observation report can be found on the Rancho Mesa website.

Rancho Mesa also has a number of toolbox talks available for cold weather, including safety tips when using an industrial space heater and weather awareness for landscape contractors and tree care companies. To enable access to these weather-specific toolbox talks via the mobile app, Rancho Mesa recommends the SafetyOne administrator create a Winter Weather toolbox talk group specifically for these toolbox talks and assign the group to the desired projects or crews. This will make the winter weather-specific toolbox talks available to users in the mobile app.

Rancho Mesa recommends the following toolbox talks through SafetyOne:

• Cold Weather

• Driving in Wet Conditions

• Effects of Weather

• Hypothermia

• LP Gas Salamander Heaters

• Snow Removal

• Temporary Heat Safety

• Weather Awareness for Landscape Contractors

• Weather Awareness for Tree Care Companies

To learn more about preparing for the winter weather or how to enable toolbox talks in SafetyOne, reach out to your client technology coordinator. 

Best Practices Approach to Insuring Janitorial Companies

Author, Jeremy Hoolihan, Partner, Rancho Mesa Insurance Services, Inc.

Running a successful janitorial company in California can often be cut throat. With low profit margins, janitorial companies continue to face daily challenges like increased wages and material costs, as well as aggressive competition that continues to under bid contracts. It is natural for business owners to explore ways of cutting costs to help their bottom line, but insurance should not be one of them. In fact, they should be looking to add coverages that are unique to janitorial operations and protect the long term health and viability of the company. 

Following are a few key coverages and endorsements to consider that could help insulate a janitorial business from serious losses.   

Crime Coverage (First and Third-Party)     

A commercial crime policy can insure a janitorial company from an employee stealing from them (i.e., a first-party crime). These types of claims include, but are not limited to, forgery or alteration, funds transfer fraud, credit card fraud, and computer fraud.

Third-party crime includes theft of a client’s property. Many janitorial companies have employees cleaning after hours. If property on the client’s premises goes missing, it’s often the janitor that gets accused. This is when 3rd party crime coverage comes into place.

Lost Key Coverage

If you are operating a janitorial company and your employee misplaced or lost a master key for one of your client’s properties, are you prepared to replace all the keys and locks? Depending on the number of locks to replace, your business could be out tens of thousands of dollars. Lost key coverage is typically an endorsement that can be added to a general liability policy. Limits and deductibles often vary, depending on the customer’s request. 

Limited Pollution Liability

With most janitors using chemicals, cleaning products, and power washers, it is highly recommended that the company has the limited pollution liability endorsement added to their policy (or better yet, a standalone pollution policy).  Coverage for accidental job site pollution that may arise from chemical spills and accidental water runoff could prove extremely valuable.

Cyber Liability

Janitorial companies often store clients’ information and process payments online for their customers. This can be very enticing for hackers. Which is why business owners should consider carrying a cyber liability policy that can insure the company for data breaches, cyber-attacks, cyber extortion, business interruption, computer fraud, and much more. 

Cyber-attacks can debilitate a business and bring it to a screeching halt. Cyber liability coverage can assist with keeping a business afloat during these very trying times.

Employment Practices Liability Insurance (EPLI)

EPLI insures a business when a current or former employee sues the employer for such things as wrongful termination, sexual harassment, retaliation, etc.  An EPLI policy can also insure a business if a non-employee sues the business for other similar harassments. With defense costs and settlements commonly reaching well over six figures, these claims can easily put a company out of business. And to top it off, even if a company is proven innocent, the cost of defense alone could jeopardize its financial stability.

At the end of the day, insurance is simply risk transfer. Businesses elect to either transfer the risk to an insurance company or self-insure it. The key is knowing what risk transfer options are out there and what they cost. It starts with partnering with an insurance broker that has expertise in your industry.

I’ve been specializing in insurance for the janitorial and construction industries for over 20 years. If you have any insurance related questions, I am here to help! Contact me at jhoolihan@ranchomesa.com or (619) 937-0174.

New California Employment Laws for 2025

Author, Jadyn Brandt, Client Communications Coordinator, Rancho Mesa Insurance Services, Inc.

Starting January 1, 2025, a number of new laws will be on the books for employers in California. Here’s a look at two of the changes business owners need to be aware of at the start of the new year.

First, Senate Bill 1100 (SB 1100)bars employers from requiring a driver’s license for a job, unless that job satisfies a two-part test. Employers will only be able to include a driver’s license requirement in a job posting if they “reasonably expect driving to be one of the job functions for the position,” and “reasonably believes […] using an alternative form of transportation (including ride hailing, carpooling, walking or biking) would not be comparable in travel time or cost,” according to the law.

Another new law worth noting requires multiple updates to workers’ compensation and whistleblower posters in the workplace. Assembly Bill 1870 (AB 1870) requires employers to add new information to the informational poster titled “Workers’ Compensation Notice to Employees — Injuries Caused by Work.” Starting January 1, 2025, the poster must alert employees that they may take council from a licensed attorney for advice on their legal rights.

Additionally, employers will also need to display a whistleblower notice that discloses an employee’s rights and responsibilities under the state’s whistleblower laws.

It is important that employers across the state of California understand how to implement these new laws within their business, in order to avoid legal penalties and foster a fair and informed workplace. Managers should work with their human resources department to ensure their business is in compliance with these new laws.

Rancho Mesa’s RM365 HRAdvantage™ is a great resource for employers looking to make certain they are up to date with these changes.

These are just a few key laws California employers should keep in mind for the upcoming year.

For a full breakdown of the changing legal landscape, be sure to attend Rancho Mesa’s 2025 Employment Law Workshop, happening Friday, November 22, 2024 from 10:30 A.M. to 11:30 A.M. at the Mission Valley Library.

Exploring the Current Commercial Surety Climate

Author, Andy Roberts, Surety Account Executive, Rancho Mesa Insurance Services, Inc.

Surety Account Executive Andy Roberts interviewed Miggs Borromeo, Commercial Surety Underwriter for Merchants Bonding, and discussed the current climate of the commercial surety world in Southern California. They also covered the bonding trends most commonly seen today, and the programs that Merchants Bonding Company offers.

Andy Roberts: Welcome back, everybody to StudioOne™. My name is Andy Roberts and I’m a Surety Account Executive here at Rancho Mesa. Today, my guest is Miggs Borromeo who is a commercial surety underwriter in San Diego and working for Merchants Bonding Company.  Today, we’re going to be talking about the commercial surety world.

Miggs, welcome to the show.

Miggs Borromeo: Thanks for having me, Andy. I’m excited to be part of the show.

AR: Awesome, so before we dive in, why don’t you give us a little bit of background about yourself.

MB: For sure. Hello everyone, my name is Miggs Borromeo. I’m the Commercial Surety Underwriter for Merchants Bonding, the eighth largest surety company on SFAA. I currently handle the Southern California territory, starting from Los Angeles all the way down to America’s Finest City, San Diego. I’ve been in the industry for about a year and a couple months, so there’s a lot to learn and many more years to go, as they say. I’m originally from Maryland but moved to California a couple years ago.

AR: Fantastic. So, how did you get involved in the industry?

MB: It’s always a funny story, because it all started with my friend’s dad being the head of surety at the company I interned for back in college. One day in the summertime he gathered all the interns to talk about surety bonds. And funny enough his name is Mike Bonds, so shout-out Mr. Mike for all the introductions. But, he talked about the surety industry and what it entailed. He talked about working with contractors, analyzing financial statements, and visiting and traveling with agents. And so, I thought that was a really cool industry, especially being a college student. The only profession I really knew was financial analyst, accounting, and investment banking. So, I started doing some research and once I graduated college I applied to become a surety underwriter in L.A. But, unfortunately, COVID happened that year, so, you know, a bunch of companies were having hiring freezes, so I had to put a pause in that dream for a little. But, fast-forward to a couple years later and I moved to San Diego, and thankfully, I had a friend named Andrew Shin who is their current contract underwriter referred me to the company he was working at that provided business loans. I started as an underwriter and switched around to sales, and one day I just wanted to update my resume, so, as you know, you search on Google “surety underwriting positions”.

AR: They’re looking for them all over the place.

 MB: Yeah, exactly. So, I was lucky enough that Merchants popped up as the first link, so I clicked on it and read all about them. You know, they’ve been around for 90 years, focused on one product which was surety, so I really liked that. And then I saw that a bunch of their underwriters would travel every year for meetings and trainings and, so, I thought that was a great part of the culture, and I wanted to be a part of that. So, I applied, flew to good old Iowa, and luckily passed the test.

AR: So, basically like a dream come true, kind of circling back to what you said about your surety dream, earlier in that statement.

MB: Yeah, exactly. And, sometimes, you know, it takes a while to get to it, but I’m glad that I was able to kind of experience different roles to build up my skillsets to become a surety underwriter.

AR: Absolutely. And I feel like too, you know, I came from the insurance world where, you know, not a lot translates, but I had a good understanding of the insurance world. And that’s what really fed me into this job, and this role, and this opportunity that I’ve really grown to love. And, you know, it’s been a lot of fun that way.

So, kind of diving into your actual role as a commercial surety underwriter. You know, I know commercial surety has a vast range of bonds that kind of fall under that umbrella. You know, looking at your license bonds for contractors, or subdivision, or maintenance landscape. Can you talk to us about your experience with the variety, with all of those?

MB: Yeah, for sure. As you mentioned there’s definitely a wide variety of bonds. I look at our bond form library and there’s 3,000 bonds and, you know, it’s a lot. And there’s always new ones coming in, so I always handle different types of bonds, I never know which kind I’m going to get. But, luckily enough, Merchants has a great library that I mentioned about, where a bunch of underwriters from the past and current underwriters right now are just researching the bond types that they see, you know, summarizing guarantees, what the risk entails and, kind of, what information we need. And, it’s not only helpful for me but it’s also helpful for the agents that are seeing a bunch of different bonds that they’re not used to. We’ve gotten feedback that the library is very helpful, it helps them understand the bond. And, like you mentioned, I handle a different, wide variety from license permit to financial guarantee, so it’s just all about trying to understand what the bond is guaranteeing and what we need. Do we need credit reports; do we need financial statements; personal business indemnity? And, sometimes I see bonds that no one has seen before, so I have to, kind of, put a little more research into it; seeing the county, seeing what it entails and to see if we can support it. So, it’s been a learning experience.

AR: Yeah, well I feel too, like especially on your guys’ portal, you know, I get a request from a client for some random license bond that I’ve never heard of or seen, you can go in there and kind of figure out, “Well, Merchants is willing to write it in their portal.” So, you give a nice breakdown of everything that it is and what you guys need. So, that’s really, really helpful.

How long do you think, since you’ve been here for a little over a year, how long did it take for you to, kind of, get up to speed in this and really feel confident in engaging with agents and clients, and really knowing what was going on?

MB: I’d say it took me about nine months to year. There was definitely a lot of learning process, especially the first couple months when you have to learn about the system and really learn about the industry.

But, I think I was very fortunate enough to have a great team around me, starting from management position who’s had 15 plus years of experience, to my current teammates who have a wide variety of perspectives from the agency side and different markets, and to even our assistants who are always helping us out with our day-to-day activities. So, the first couple months was really understanding what the systems were all about. And then six to nine months we had a training program where they would sit us down and talk to us about how to properly plan the agency meetings, how to conduct them, specific questions that the agents might ask.

And so, it’s definitely a great experience to have that around me, but it’s also cool that there’s always new questions coming up, and so there’s always something to lean. And, we’re always improving, trying to improve, our technology and so, we’re always trying to focus on marketing those new things we come up with.

AR: Fantastic. How often do you have to go out to Iowa?

MB: I try to go about twice a year. One’s mandatory for the underwriting meetings, but, sometimes I like to stop by and say hello to everyone.

AR: Hopefully not in the wintertime.

MB: Yeah, no. Can’t get me out there in the wintertime, besides this time for November’s underwriting meetings.

AR: So, kind of circling back to the different bond types. So, are you seeing a lot of submissions on a certain type right now?

MB: Yeah, so, I’ve been seeing a lot of Motor Vehicle Dealer Bonds coming up, and I’ve also seen Immigration Consulting. But, it’s starting to really pick up with our Court and Probate bonds. I’ve been starting to see a lot of Non-Construction Performance Bonds, Landscaping Projects. The variety is starting to pick-up as the more visits I come in and really just tell what Merchants’ appetite is, I’m starting to see different types of submissions. And I think that’s the main idea of it, is that we haven’t had presence in Southern California, but now I’m around and I’m visiting agents, I’m letting them know that, “Hey give us a chance to review these files,” and that’s where the variety comes in.

AR: Yeah, no, absolutely. Kind of looking at the marketplace, and maybe this might be a tough question just because you guys have such a wide variety of bonds that you guys write on the commercial side, but what are some of the main challenges that you’re kind of seeing, and have you maybe seen any uptick in claims?

I know, because, especially, kind of, thinking of the license bonds for the contractors, you guys have really kind of stepped in and filled the void for a different surety that, kind of, left the marketplace. So, there’s probably been a lot more volume there.

MB: Yeah, there’s definitely a lot of claims activity that I’ve seen with the Motor Vehicle Dealer Bonds. Principles are going out of business so claims are rising. I’ve also seen challenges in the notary side. The Notary Bonds are tied in with the mortgage interest rates, and so, you know, not a lot of people are buying houses right now so there’s not a lot of need for notary.

And I’ve also seen that, just by, like, challenges, you know, I see a lot of agents talking about, they’ve been seeing a lot of smaller transactional bonds that’s been taking up their time. And so, as I mentioned earlier, Merchants is always trying to improve their technology, so we’ve recently rolled out Hub Express, where it allows agents to issue small transactional bonds with little touch. We recently updated our systems to allow California Contractor State License Bonds, so that allows agents to issue those pretty fast. And, it’s tax season so, tax repair bonds too are a big deal, it helps them out on that.

AR: Yeah, that’s fantastic. Is there anything else you want to talk about on the commercial side, or any questions you might have for me?

MB: Yeah, for sure. Before we end the show, would you happen to have any advice on any new underwriters or agents that’s entering the industry right now?

AR: What I think helped me a lot when I first got in, I’ve been doing this for six and a half years now, was I started participating in the Surety Association right away, because, industry wise, that really helps you to get to know everyone in town; all the different agents, all the different underwriters. Which, I mean, you’re already doing that so, that’s a good step. So, maybe your next step is to try and get on the board next time there’s a company position for there. I think that’s been really, really beneficial for me as well. So, I would recommend doing that.

Other than that, I would just say you’re doing the right thing in, like, getting involved in the industry and getting out in front of people. Surety is such, more relationship driven than the insurance side. So, as you’re going to start growing your book, both the underwriter side and the agent side, you just have to be out there in front of people, and building your relationships and just knowing that this is more of a longer play and not a short-term play.

MB: Yeah, I agree. Great advice. I know you mentioned joining the board, I guess until a position opens up I’ll still be the photographer for the events.

AR: Yeah, absolutely. Well, Miggs, thank you so very much for joining me in StudioOne™ today and giving us some background on yourself and some info on the commercial surety industry.

MB: Yeah, thanks so much for having me Andy, this was fun. It’s always a pleasure to see you and I’m excited for all the future events that I run into you at.

AR: Absolutely.

Three Industry Benchmarks all Landscape Companies Should Track

Author, Greg Garcia, Account Executive, Rancho Mesa Insurance Services, Inc.

There are three major benchmarks that all landscape companies should consider when looking at how well they manage risk.  The three benchmarks are your:

• Average Claim Cost

• Claim Indemnity Rate

• Claim Frequency Rate

Knowing the importance of this, we designed a key performance indicator (KPI) dashboard that highlights these industry benchmarks, as well as compares them against other landscape companies in their geographic area.

We have pulled data from all landscape companies using the 0042 class code and have come up with some industry averages.  For the sake of this example, we will use California landscape contractors only. 

In California, the average claim cost for landscape contractors is $50,300 per 1 million dollars of landscape payroll.  In other words, on average for every 1 million dollars a landscape company has in the 0042 class code they should incur about $50,300 in claim cost. That number would rise to $100,600 in claim cost if a landscape company had 2 million dollars in 0042 class code. 

The next major category to consider would be indemnity rate.  Indemnity rate, or claims that result in lost time and temporary disability, the industry average is 0.7 claims per 1 million dollars of 0042 payrolls. 

Finally, the last category we consider is frequency rate.  In California for every 1 million dollars allocated to the 0042 class code on average that company will have 1.5 claims.

Knowing the data will not only give your team a good indication of how safe your company is, but these categories also play a significant role in determining work comp premiums.  There are several underwriting metrics a worker compensation underwriter takes into consideration when looking at a prospective business.  The Experience MOD, loss history, and of course safety protocols and procedures to name a few. 

The other major metric that underwriters are looking at are these three benchmarks: , average claim cost, indemnity rate, and frequency rate.  Simply put, the better a landscape company scores in these critical metrics, the better chance that an underwriter will add schedule credits to lower the worker’s compensation premium.

Now is a great time to see how well your landscape company stacks up against your peers, and consider any internal options to improve your metrics in any of these three major categories.

Protecting Your HVAC and Plumbing Business with Proper Classifications

Author, Matt Gorham, Account Executive, Rancho Mesa Insurance Services, Inc.

Within the construction industry, it is common for questions to arise about how to categorize work that a contractor performs. While organizations like the Insurance Service Office (ISO), Workers’ Compensation Insurance Rating Bureau (WCIRB), and the National Council on Compensation Insurance (NCCI) have created classification systems, nuances in worksite demands can lead to confusion about which class code to use for a given business’s operations.

Even though many types of work have similarities, mistakes in classification can lead to:

1. Problematic coverage exclusions

2. Surprise audit bills

3. Overpaying insurance premiums

General liability class codes differ between types of work, such as commercial/industrial plumbing and residential plumbing, or heating and air conditioning with or without liquefied petroleum gas.

Problems can arise for businesses when their coverage fails to match the work being performed, especially when certain endorsements are included within their policies. When a loss happens in this situation, a carrier may deny coverage, leaving the business to respond to the damage or injury on its own.

We recently started working with an HVAC contractor that had previously found themselves on the wrong end of this scenario, having incurred over $350,000 in property damage costs because they were held responsible for flooding an apartment while moving a water line. Their previous carrier denied the claim because of a coverage limitation endorsement, which specifically limited coverage only to the classification codes listed on their policy.

In severe cases, a carrier may also choose to cancel or non-renew coverage for the business if they learn that the business’s operations are heavier or significantly different than what was previously represented.

Like general liability, workers’ compensation class codes can also cause challenges for contractors.

Consider the example of an HVAC contractor. Their workers’ compensation payrolls could easily be categorized into either 5183/5187 or 5538/5542. There is a subtle difference that separates whether payroll should be classified within the plumbing class codes or the sheet metal class codes. However, there can be a substantial difference in the corresponding premium a company would pay for workers’ compensation, especially when you consider that these classifications are subject to different dual wage thresholds.

An HVAC company with a technician getting paid $32 per hour whose payroll is classified as 5187 could expect to pay premiums from a $4 to $5 base rate per $100. Another HVAC company with a technician getting paid the same, but categorized as 5538 could expect to pay premiums from a $10 to $12 base rate per $100. While the lower rate may at first be appealing, if payroll is improperly classified throughout the policy term, an audit could lead to a substantial additional premium, so it is best that you classify your work correctly from the start so that your premium properly reflects the risk of the work being done.

Plumbers often encounter a similar classification challenge. Should they be categorizing payroll under the plumbing class code only? Do they have any sewer or excavation exposure? That depends on some key details in their operations and will directly influence which carriers are willing to partner with them and how aggressively they price their coverage.

Rancho Mesa recognizes the importance of proactively working with accurate, complete information. To better serve the needs of our clients, we have developed a comprehensive submission and renewal process, which includes:

• Pre-renewal meetings 90 to 120 days before the renewal date to understand any changes in the business

• Industry specific supplemental applications to gather more thorough and relevant information

• Open, honest communication with carrier partners that fosters trust and transparency

• Policy reviews and audits to identify potential coverage issues

To request a policy audit, and ensure that the coverage and pricing for your insurance program properly aligns with your industry, contact me at (619) 486-6554 or mgorham@ranchomesa.com.

Trim the Risk: Professional Liability for Tree Care Companies

Author, Rory Anderson, Partner, Account Executive, Rancho Mesa Insurance Services, Inc.

Whether you have a consulting arborist on staff or not, every tree care company has a professional liability exposure. Your general liability policy will likely exclude professional liability claims. A misdiagnosis of tree disease, damage to property, or an injury resulting from an error or miscalculation can be extremely costly. So, it is important to understand the risk, then make a decision on whether or not you would like to transfer that risk by purchasing a professional liability policy.

Many tree care companies have certified arborists on staff that offer consulting and expert advice related to the health, safety, and management of trees. This type of work clearly has the highest need for professional liability insurance to cover any errors or incorrect advice that leads to financial loss, property damage, or bodily injury. A professional liability insurance policy would help protect the arborist by covering legal defense costs, settlements, or judgements if the arborist is found liable for errors or omissions related to their consulting work.

If you do not have a certified arborist on staff and you are simply performing tree care contracting work, you still have exposure to professional liability. General liability policies are in place to cover third party property damage and bodily injury that occurs as a result of your work. They do not, however, cover your work itself. If your tree care business removes the wrong tree or the tree that you pruned died from over-pruning, and your client sues for the cost of the tree and emotional distress, you would need faulty workmanship coverage to cover your work. For many of these instances, you may choose to absorb these costs internally; but, if the mistake was on a mature and rare tree, paying out of pocket may severely impact your balance sheet.

Although there are more examples, these are the two main professional liability exposures that tree care companies face. In a field as specialized as tree care and arboriculture, protecting your business is crucial.

Talk with your insurance agent about purchasing a professional liability policy to transfer your risk and give yourself peace of mind, knowing that you are covered for any unexpected or unpleasant surprises.

If you have any questions, please reach out to me at (619) 486-6437 or randerson@ranchomesa.com.

Digitalizing Risk Management: A Step-by-Step Guide for Getting Started

Author, Alyssa Burley, Partner, Media Communications & Client Services Group, Rancho Mesa Insurance Services, Inc.

Imagine you are working in a highly productive organization. Over many years of trial and error, the team has streamlined their operations to the point of a well-oiled machine using good ol’ paper and spreadsheets. Then, your insurance broker offers a digital risk management solution and you are faced with the prospect of transitioning your manual processes to a digital platform. This is the scenario that many Rancho Mesa clients have faced and successfully overcome.

Mobile applications have become an integral part of daily life by streamlining everything from banking to finding a ride in the city. Manual tasks can now be completed easily from a mobile device. So, why haven’t most businesses implemented this mobile technology into their daily operations?

Planning & Support

Transitioning a manual process, like the administration and documentation of toolbox talks, safety trainings, jobsite inspections, and other risk management activities, to a digital platform does not have to be a daunting task, though it may seem that way at first. With proper planning and support from those who have helped others digitalize their manual processes, you can significantly increase the chances for success. Utilize resources like Rancho Mesa’s client services team to provide best practices for each manual process that will be replaced by a digital platform.

Where to Start

Once an organization has decided they are ready to make the move to a digital platform, they often ask how they should begin. It is a best practice to start digitalizing a process that has few barriers to implementation, yet will still have a significant impact on operations. Therefore, utilizing digital toolbox talks (e.g., tailgate talks, safety meetings, and the like) is typically the best process to tackle first.

Next, review your existing toolbox talk process and document the steps. It may be helpful to ask the following questions:

• Who decides which topics will be used each week?

• Where is the content sourced?

• How is the topic content distributed?

• Who administers the toolbox talk (e.g., tailgate talk, safety meeting, etc.)?

• Where are the toolbox talks performed?

• How are employees tracked who participated in the toolbox talk?

• Where is the documentation stored?

The answers to these questions will help you identify who will need access to the toolbox talks in the digital platform, whether through an administrator website or a mobile application.

Then, identify one to three people in the organization who are excited about being an early adopter of the new technology. They should be excited at the prospect of streamlining the manual process of getting the toolbox talk content each week, performing the safety meeting, passing around the sign-in sheet, and making sure the signed paper makes it back to the office and in the correct file cabinet. These early adopters could be an administrator, foreman, supervisor, or safety manger, depending on who is responsible for performing portions of this task.

The early adopters will function as the organization’s initial testers, cheerleaders, and then coaches for the rest of the team. They will test the digital process by accessing toolbox talk content and documenting the meeting attendance with both pictures and signatures from their mobile devices. They will report back to their organization’s leadership on how the new process is working. This gives the organization a chance to work with their insurance broker’s client services team to offer suggestions for minor adjustments to the new digital process. Meanwhile, the early adopters will naturally promote the new technology to their co-workers and get others excited for the launch of the new process.  

Once the new digital toolbox talk process is tested and adjusted as needed, it is ready to be released to the rest of the organization. There will be a learning curve, but the early adopters will be familiar with how the streamlined digital process works and will act as informal coaches for new users of the platform. 

Benefits

Changing a well-established process can cause some people within the organization to question why the change is needed in the first place. So, be prepared to explain the reasoning behind the transition. Explain the benefits that will be felt by both the employee and the organization.

Employees will spend less time on paperwork, so they can get back to their other job responsibilities. No longer will a supervisor have to worry about where the sign-in sheet went from yesterday’s safety meeting. All the documentation is digitally uploaded to the cloud and instantly accessible to those who need it.

The organization can ensure compliance with the Occupational Safety and Health Administration’s (OSHA) safety meeting requirements and eliminate lost paperwork. No longer do organizations need file folders full of sign-in sheets with, unfortunately, illegible signatures. Digital records are easily accessible and filtered by date, project, topic, etc. in order to streamline the process of retrieving data.

All of these things save time, effort, and increases compliance, which ultimately translates to reduced costs.

If your organization is ready to make the transition from paper to digital, contact your Client Technology Coordinator for more information about Rancho Mesa’s proprietary SafetyOne™ mobile app and website.